Bumper Overrider Piping

Rubber piping to suit bumper over riders. Goes between over rider and bumper bar. 1 metre length supplied, which is enough to do 4 over riders (1 car). Vehicle: Mini / Sprite & Midget / MGB 37H9871M / 400-404

Chrome Side Mould - Mini Cooper S

Mini wheel arch chrome side mould, Cooper S profile. Each trim is enough to do one side of car. Vehicle: Mini GZF105A

Chrome Side Mould - Standard Mini

Chrome wheel arch side mould, standard profile. Each trim is enough to do one side of a Mini Sedan. Vehicle: Mini GZF107A

Flare Kit - Mini Clubman S and GT

Reproduction flare kit to suit Mini Clubman S, SS, LS, GT and Sunshine. These flares require the original wide metal mounts on the car. Original chrome side strip fits these flares.

Flare Kit - Mini Cooper S Mk II

Reproduction flare kit to suit the Australian Morris Mini Cooper S Mk II. These flares require the original wide metal mounts to be on the car. Finish with GZF105A chrome side mould.

Flare Kit - Mini Innocenti Style

Innocenti Style flare kit to suit all Mini sedans - Classic Roundnose and Clubman. Kit comes with 4 plastic screw-on flares, 2 plastic side strips (goes between flares along body seam) and screws/washers for fitment. Approximately 40mm wide at top of...

Fuel Tank Neck Inner Foam Seal

High density foam seal for fuel tank filler neck to body, inside boot. Suits all model Mini including Van, Austin Healey Sprite and MG Midget. Model: Mini / Sprite & Midget  

Fuel Tank Neck Rubber Grommet - Mini

Rubber grommet to seal fuel tank filler neck to body. Suits all Mini sedan and van models, plus also some Mini Moke with small neck side fuel tank. Vehicle: Mini / Moke 14A7057

Grille Finisher - Left Hand - Mini 1960-71

Left hand grille 'whisker'. Suits Australian roundnose Minis from 1960 to 1971. Use with ADA3583 clip. Vehicle: Mini 14A7783

Grille Finisher - Right Hand - Mini 1960-71

Right hand grille 'whisker'. Suits Australian roundnose Minis from 1961 to 1971. Use with ADA3583 clip. Vehicle: Mini 14A7782

Grille Finisher Clip - Mini 1960-71

Retaining clip for roundnose Mini grille finisher ('whisker'). Suits all roundnose models 1960 - 1971. Stainless Steel. Vehicle: Mini ADA3583

Grommet - Battery Box Floor

Rubber Grommet for Battery Box floor (fits 3/4" hole). Approximate diameter is 23mm. Cross reference: BH021  

Grommet - Body to Wiring Harness

Rubber Grommet for wiring harness to go through body. Approximate diameter is 35 mm.  

Grommet - Fire Wall Cross Member

Rubber grommet to fit holes on fire wall cross member. Suits all Minis. Fits 5/16" hole.

Grommet - Floor / Boot Floor (small)

Rubber grommet/plug for floor/boot floor in Minis. Fits hole 3/8" diameter.

Grommet - Heater Hose through body (1/2")

Rubber Grommet for heater hose to go through body. Approximate diameter is 35 mm. Takes 1/2" heater hose. 34G3651 

Grommet - Multiple Use (1/2" hole)

Rubber grommet to fit 1/2" hole. Suits all Mini models. Domed type. Use for:- Floor- Inner guard- Bulkhead near Speedo RFR209 / 14A7031

Grommet - Speedo Cable through Body

Rubber Grommet for Speedo cable through firewall/body on Minis. Approximate diameter is 30 mm. 5L62 / RFR306

Headlamp Bucket Nylon Insert - Mini & Moke

Nylon headlamp insert which goes on the guard to hold/adjust the 'bucket' on all Minis and Mokes. Require 4 per headlight. Cross reference: MYH882

Headlamp Seal 'bucket' to Body

Rubber headlamp seal which goes between the body/guard and headlight 'bucket'. Require 2 per vehicle. Fitment: - Mini & Moke - Morris Minor (7" light models) - Austin Healey Sprite & MG Midget - MGA 1955-62 - MGB 1962-80 - MGC all models -...

Indicator/Park Lamp Rubber Base

Rubber base for indicator/park lamp assembly on early Minis, Morris Minor (rear - Van, Ute, Traveller), Austin Healey Sprite and MG Midget. Suits 'domed' lenses, Lucas L594 type. Vehicle: Mini / Morris Minor / Sprite & Midget 576105 / 508162

Indicator/Park Lamp Seal - Base (Mini Clubman)

Leyland Mini Clubman front indicator/park light gasket. This seal goes between the indicator base and car body. Vehicle: Mini 37H4189

Indicator/Park Lamp Seal - Lense (Mini Clubman)

Leyland Mini Clubman front indicator/park light gasket. This seal goes between the plastic lense and the indicator base. Vehicle: Mini 37H4190

Indicator/Park Lamp Seal Set (Mini Clubman)

One set of Leyland Mini Clubman front indicator/park light gaskets. Includes lense to base seal (2) and base to body seal (2). Enough for both lenses. Vehicle: Mini 37H4189 / 37H4190

Lock Tab - Front Subframe Tower Bolts

Locktab for two bolts at the top of the front subframe (in Engine bay). Suitable for Dry suspension Mini and Moke models only. Vehicle: Mini / Moke 21A1470

Tail Light Base Gasket/Seal - Mini

Tail light seal to suit Mini sedans 1960-1971. This gasket used between body and light base. Supplied either Grey or Black depending on stock availability. The seal for the lense is 62570617. Vehicle: Mini 62570616 / 57H5399

Tail Light Base Seal - LH - Mini Clubman

Left hand side tail lamp seal to suit Mini Clubman with square tail lights (1971 to 1978). Goes between lamp base and body. Vehicle: Mini Clubman 37H2689 / 54578883

Tail Light Base Seal - RH - Mini Clubman

Right hand side tail lamp seal to suit Mini Clubman with square tail lights (1971 to 1978). Goes between lamp base and body. Vehicle: Mini Clubman 37H2690 / 54578899

Tail Light Lense Gasket/Seal - Mini

Tail light seal to suit Mini sedans 1960-1971. This gasket used between lense and light base. Supplied either Grey or Black depending on stock availability. The seal for the base is 62570616. Vehicle: Mini 62570617 / 57H5399

Tail Light Lense Seal - Mini Clubman

Tail lamp seal to suit Mini Clubman with square tail lights (1971 to 1978). Goes between lense and lamp base. Suits either left or right side. Vehicle: Mini Clubman 37H6778